UCRETE MT - 4 - 6 mm Heavy Duty Polyurethane Floor Finish

How does UCRETE MT work?

UCRETE MT provides a lightly textured protective floor finish suitable for applications in wet and dry process environments. It is dense and impervious, providing the ideal floor finish for applications in the food and beverage, pharmaceutical and chemical industries and wherever a robust, long lived floor is required.

UCRETE Industrial Flooring has been widely used throughout industry for more than 40 years, many of the older floors are still in service. A detailed project reference list is available upon request

What makes UCRETE MT a unique solution?

UCRETE MT provides a robust floor topping to give a long lived floor and provides a lightly textured protective floor finish suitable for applications in wet and dry process environments.

What are the features and benefits of UCRETE MT?

Rapid Installation -

  • Specifications are available that enable UCRETE MT and primer to be installed and cured within a 12 hour application window.

Temperature Resistance -

  • The UCRETE MT resins do not start to soften until temperatures above 130°C are exceeded. 4mm UCRETE MT floors are fully serviceable to 70°C

Air Quality

  • UCRETE has been awarded the Indoor Air Comfort Gold Label following extensive VOC emission chamber testing and auditing of quality management and production control procedures.

Non Tainting

  • UCRETE MT is solvent free and non- tainting from the end of mixing, as tested by the Campden Technology Ltd.

Chemical Resistance

  • UCRETE MT offers exceptional resistance to a wide range of chemical aggressors.

Cleaning & Hygiene

  • UCRETE flooring systems are accredited for use in facilities operating HACCP based food safety systems.

Impact Resistance

  • With high mechanical strengths and a low elastic modulus, UCRETE MT is very resilient and able to withstand severe impact loads.

Substrate Moisture Tolerance

  • UCRETE Industrial Flooring is extremely tolerant to residual substrate moisture and can be installed directly onto 7 day old concrete, or onto old good quality concretes with high moisture contents without the use of special primers, provided there is a functioning DPM within the structure. This enables rapid construction programmes to be main-tained and facilitates refurbishment work in wet process areas.


  • UCRETE MT exhibits zero absorption when tested to CP.BM2/67/2.

Slip Resistance

The UCRETE MT surface profile has a coefficient of friction as determined to EN 13036 Part 4 with 4S rubber on the wet floor as follows:

  • UCRETE MT: 40 – 45


UCRETE MT is available in eight standard colours: Red, Yellow, Green, Orange,

  • Grey, Cream, Blue, Green/Brown

Please enter your full name

Please enter your Organisation Name

Enter Your Adress

Provide your contact number

Provide your Mail ID

Enter the product name you are interested

User agreements
Please don't forget to fill in your address if you wish to receive information via mail. BASF will only use your data to reply to your request. We will save your data only as long as necessary to answer your question. The data supplied voluntarily by you will be stored and processed by BASF using IT systems. Insofar as personal data are involved which we store in order to cultivate business relations, BASF assures you that all rules and regulations of the German Data Protection Law will be respected. Your personal data is not passed on by us or by our agents for use by third parties in any form whatsoever, unless we have obtained your consent or an official injunction to do so. You have the right to check all data relating to your person stored with us and inform us, if it is in your opinion out-of-date or incorrect or should be deleted. To inform us, just send an email to the email address indicated in the imprint or to our Data Protection Officer (see Data Protection).
* Please fill out these fields to help us to process your inquiry. All address-data submitted will only be used for this purpose.


UCRETE MT Technical Datasheet

pdf (134.14 Kb)